ULI Edge Banding Machine
1.This Pre-milling equipment with double trim-blades works on the waved effect that is caused by precise saw.
2.The glue mechanism adopts a special structure to gelatinize the plates and coating materials uniformly, thus ensuring a more solid conglutination.
3.This Woodworking Edge Banding Machine is equipped with two individual high frequency motors, trim the exceeding edge on the top and bottom side of the panel, making the top and bottom side of the edge smooth and even.
4.The buffing device adopts the board processed by cotton polishing wheel to make a more smooth surface.
It is mainly used for PVC and acrylic edge banding of panel furniture, and it is better to use edge banding of 0.8mm thick or more.
Flush: Automatic model tracking and high-speed motor realize the function of high speed operation.
Scratch edge: This Woodworking Edge Banding Machine realizes the function to eliminate the ripples caused by the cutting process of trimming non-linear motion.
Polishing: It is used to clean and process the plate with cotton polishing wheel to make the edge of the edge seal smoother.
Slotting: It can be used for directly grooving the side panels, bottom plates, which can also be used for slotting the aluminum edging of the door panel.
|Product name||Woodworking Edge Banding Machine|
Italy Air-cooled variable frequency spindle,9KW/12KW optional
Taiwan PMI screw and linear guide transmission
Automatic Tool change
Imported hat type tool magazine,Tool change every 7 seconds
7.5KW, flow rate 250m3/h
Taiwan Control System
Japan Yaskawa Servo AC System
Max processing speed